Nation Wide Surplus / FISHER ET
Sell Fisher ET Control Valves
Call 832-721-8398 · Upfront payment in most cases
One valve. Three labels. A clearer equipment offer.
Have a Fisher ET left from a project, removed during maintenance or held as an unused spare? Nation Wide Surplus evaluates ET valve bodies and complete assemblies for purchase. Start with photos of the valve, actuator and any attached controller, plus your quantity and location.
What we buy
Send surplus Fisher ET valves, bare body-and-bonnet assemblies, complete actuated valves and mixed industrial lots that include ET equipment. Describe unused stock, stored spares and removed equipment separately. If a valve is incomplete, include it in the inquiry and tell us what is missing.
A single identified assembly can be worth discussing. So can a storeroom lot or a group of valves received by a scrap yard. We review the equipment offered, its condition and purchase logistics before deciding whether to make an offer.
Model identification guide
Fisher identifies ET as a balanced, cage-guided control-valve design. The complete assembly may carry several model numbers because the valve, actuator and instrument are different products. Fisher ET product overview
An actuator label reading 667 or a controller label reading DVC6200 does not establish that the valve is an ET. Photograph the valve's own identification and any associated paperwork. Keep each assembly's photos together when the lot contains similar-looking equipment.
Nameplate locations and serial numbers
The ET instruction manual identifies a serial number on the valve's body-bonnet assembly. When shipped as a factory control-valve assembly, that number also appears on the actuator nameplate. For Trim Cartridge versions, the manual identifies a plate on the bonnet flange. ET instruction manual, Parts Ordering, printed page 25
Start with accessible valve and actuator tags. Also photograph the separate instrument label. Assemblies can be altered during their service life, so send the labels even if their numbers appear inconsistent. If a plate is hidden or unreadable, send wide views from more than one side. You do not need to dismantle the valve to request an evaluation.
Sizes to record
The manufacturer's ET construction table lists NPS 1, 1½, 2, 2½, 3, 4, 6 and 8. ET bulletin, Table 3
Copy the marked size rather than estimating it from the actuator. If the paperwork shows both body size and port size, send both. For a mixed lot, put each size on its own line. These are documented available sizes, not a claim about which size has the highest resale demand.
Materials to identify
Documented body examples include cast iron, WCC and LCC carbon steel, WC9 alloy steel, and CF8M or CF3M stainless steel. ET bulletin, Table 1
Photograph the actual material marking and include material records if available. Body material does not identify every internal component. A seller should not describe the entire assembly as stainless steel solely because one visible component is stainless.
Pressure classes and ratings
The bulletin lists steel/stainless flanged constructions in CL150, CL300 and CL600, with separate cast-iron CL125/250 and EN configurations. Availability and limits depend on construction. ET bulletin, Tables 1 and 3
Send the exact marking. A pressure class is not a universal working-pressure value. Do not substitute a shutoff classification for the body's pressure class. We need what is documented on your equipment, not an assumed maximum copied from a family brochure.
End connections
ET documentation includes flanged, threaded, butt-weld and socket-weld options, with size and material restrictions. ET bulletin, Table 3
Show both connections and visible condition. Point out damaged flange faces, cut weld ends, attached pipe or missing protective covers. If the connection designation is uncertain, a clear photo is more useful than a guessed abbreviation.
Actuator combinations
Fisher's ET manual illustrates a 667 actuator and lists actuator groups that include 657 and 585C variants. Selection depends on the actual assembly. ET instruction manual, figure 1 and actuator groups
Record actuator type, size and other readable tag information. Include the mounting area in the overview photo. A loose actuator next to a valve is not proof that the two were originally matched; describe that relationship as known or unknown.
Positioners and digital valve controllers
The January 2025 ET bulletin illustrates an ET with a 667 actuator and FIELDVUE DVC7K. ET bulletin, figure 1
Photograph whatever positioner or controller is actually installed. Copy the complete designation, including suffixes, and include loose brackets or accessories if they are part of the offered lot. If your label says DVC2000, DVC6000 or DVC6200, report it exactly; this is an identification request, not a statement that every model fits every ET.
See our existing Fisher FIELDVUE equipment page for related buying coverage.
Where this equipment is used
The manufacturer describes ET-family valves for throttling or on-off control of liquids and gases. ET bulletin, General Application
For a used valve, tell us the previous service if you know it, why it was removed, and whether any inspection or repair records remain. A valve removed during a process change has a different history from one removed after a fault. Report that history without assuming it proves current operating condition.
Industries and seller situations
Emerson includes ET equipment in its chemical-processing product selection. Emerson chemical applications
Whether you manage a plant storeroom, close out a contractor's job or sort industrial material at a scrap yard, the useful first step is the same: identify the assembly before treating it as an undifferentiated load. We evaluate the offered equipment rather than assigning a value from the industry name alone.
What photos to send
- One full assembly photo, with a reference number if you have several valves.
- A readable valve tag and visible body markings.
- The actuator nameplate and complete actuator view.
- The positioner or controller label and its mounting area.
- Both end connections and any visible damage or missing pieces.
- Packaging, loose accessories and available equipment paperwork.
Use enough light to read the tags. If glare obscures a stamped number, take another angle. Keep the original full-resolution files available if a small detail needs a closer look.
What information to send
Include quantity, actual location or ZIP code, known size and class, condition, and whether each valve is unused, removed or still installed. Tell us which accessories belong to each item and whether your inventory count is confirmed or approximate.
Mention any deadline, access restrictions and available loading equipment. If the equipment was released to you after a job, explain the release and keep ownership documentation available. A complete spreadsheet is helpful for a large lot, but a few organized photos are enough to start.
Condition and purchase-value considerations
Readable identification, a clear equipment list and supporting records reduce uncertainty during evaluation. Complete assemblies, documented unused stock and identifiable accessories may present different opportunities from incomplete or heavily worn material. None of these features guarantees an offer or a fixed price.
Describe corrosion, visible stem damage, damaged connections, missing instruments or an unknown repair history. Show the condition as it is. Fresh paint does not establish internal condition, and an old box does not prove that its contents are unused.
If you have service reports, match them to the correct serial number. Do not perform a new pressure or operating test solely to submit a sales inquiry. We can discuss what further evaluation is appropriate after reviewing the information.
How payment works
We provide upfront payment in most cases. Payment terms are agreed with you before pickup or shipping.
Before the transaction proceeds, agree on the included equipment and any conditions of the purchase. If quantities or condition change after the initial review, tell us before collection so the final arrangement reflects the actual lot.
Shipping and pickup
Nation Wide Surplus considers purchases across the United States, including smaller industrial towns. Depending on the equipment and agreed transaction, collection can involve direct pickup or brokered freight. Carrier timing depends on availability, site access and loading readiness.
Send approximate dimensions and weights if known, clearly identifying estimates. Tell us whether equipment is palletized and who can load it. Discuss the purchase and transport plan before paying to ship equipment or moving a heavy lot to another location.
Related models and buying resources
EAT is the angle-body relative of ET; ETR has a different plug action. Keep the complete tag designation in your inquiry. ET family bulletin, Table 1
Explore our Fisher valve buying page, valve buying services and FIELDVUE equipment coverage. For an existing service-area resource, see Houston surplus buying. Equipment outside Houston can also be submitted for evaluation.
Browse the control valve hub, globe valve hub and Fisher model family guide to distinguish ET valve bodies from their actuators and controllers.
Fisher ET seller FAQs
Does a 667 nameplate prove the valve is an ET?
No. It identifies the actuator. Send the valve identification and the actuator tag together so the offered assembly can be evaluated accurately.
Can I offer an ET without a positioner?
Yes. Show the valve as it is and list any missing components. A bare assembly and a complete actuated package are evaluated according to their actual condition and configuration.
I have several similar valves. Can I send one photo?
Start with an overview, but identify differences in tags, size, class and accessories. One representative photo should not imply that every item is identical unless you have checked.
Is unused stock always worth more?
Condition is one factor. Model, configuration, completeness, demand and purchase logistics also matter. Send the details before assuming a particular resale price.
What if the valve and actuator numbers do not match?
Photograph both and explain any known changes or repair history. Do not change labels or guess which equipment originally belonged together.
When do you pay?
We provide upfront payment in most cases. Payment terms are agreed with you before pickup or shipping.
More questions: Nation Wide Surplus FAQs.
Contact a Fisher equipment buyer
Send the tags, show the assembly and tell us where it is.
Request a purchase evaluation · Call 832-721-8398 · Email jcostello@nationwidesurplus.net.
