Nation Wide Surplus

Home · Valve types · Brands

Sell WKM 310F Ball Valves

A WKM tag helps narrow the search, but it does not make every valve in a load the same model. Nation Wide Surplus evaluates identifiable 310F floating ball valves from plant stores, project leftovers and used equipment lots. Send the body identity and configuration before estimating value by weight.

Call 832-721-8398 · Upfront payment in most cases

What we buy

Submit unused 310F valves, stored spares and used units with honest condition details. Include manual or actuated assemblies and quantities by configuration. Keep loose operators and other WKM families identifiable when they are offered in the same lot.

Model identification guide

The 310F is a WKM DynaSeal floating ball-valve identity. Pow-R-Seal is a different WKM gate-valve family. Photograph the full 310F marking, including suffixes, rather than assigning a model from the WKM name alone.

WKM brand identification

Nameplate locations

Look for an accessible manufacturer plate and readable cast or stamped marks on the valve. Photograph any gearbox or actuator plate independently. If a tag is concealed by the installation, send the exposed sides and original inventory paperwork without dismantling the valve.

Common sizes and port information

The current SLB page lists smaller 310F configurations; an archived manufacturer sheet also documents 4-inch full-bore through 8-inch reduced-port Class 600 variants. Record the exact end-size and port markings on your equipment. A 6×4 configuration should not be listed simply as a 6-inch full-port valve.

Common materials

SLB describes carbon-steel and stainless trim offerings. Its archived Class 600 sheet lists WCC body construction for those specific variants. Record the actual body grade and any trim records; a trim description does not establish the material of every component.

Pressure classes

The current 310F product page lists ASME Classes 150–600, and the archived larger-size sheet documents Class 600 constructions. Preserve the class marked on the offered item. Temperature and service suitability require the correct construction records, not a generic model name.

End connections

Show flange faces and any visible connection markings. The archived Class 600 dimension sheet distinguishes RF and RJ dimensions. List remaining pipe, adapters and damaged faces separately so the evaluation reflects what is actually available.

Actuator and operator combinations

The archived larger-size sheet describes worm-gear operators. For any offered assembly, photograph its actual operator or actuator label and mounting. Do not assume a loose actuator in the lot is paired with the valve.

Valve actuator buying guide

Positioners and accessories

If fitted, include external control devices, solenoids, switches or positioners with their full labels. State which accessories are missing or loose. A valve with a handwheel and one with powered controls should remain distinguishable in the inventory.

Positioner hub

Where 310F equipment is found

SLB describes chemical and petrochemical applications for the model. Surplus may be stored in maintenance inventory or removed from a process installation. Tell us the known previous service and whether removal followed an upgrade or a reported fault.

Industries and seller situations

A plant inventory manager may have several boxed configurations; a contractor or yard may have unboxed takeouts with limited records. Either inquiry can start with clear photos. Group by actual tag data rather than treating an entire mixed load as one specification.

What photos to send

  • Full valve and separate view of each end.
  • WKM model plate and body marks.
  • Marked end-size, port and pressure information.
  • Gearbox or actuator label.
  • Packaging, paperwork and visible defects.

What information to send

Send quantity by model and configuration, unused or used status, location and any known service history. Include dimensions and weight when available, plus loading access. If port size or trim is uncertain, leave it unconfirmed and attach the photo.

Condition considerations

Damaged faces, missing operators, unreadable tags and evidence of prolonged outdoor storage can affect a purchase review. Keep unused stock separate from service returns. A clean paint job does not establish seat condition or leak-tightness.

How payment works

We provide upfront payment in most cases. Payment terms are agreed with you before pickup or shipping.

Shipping and pickup

Small individual valves and heavy gear-operated assemblies may need different transport arrangements. Tell us whether the lot is boxed, palletized or loose. Pickup or freight is planned around the agreed purchase, location and available loading equipment.

WKM 310F seller FAQs

Is a 310F the same as a Pow-R-Seal?

No. Preserve the marked model: 310F is a floating ball-valve identity; Pow-R-Seal belongs to a gate-valve family.

Why do you need port information?

Nominal end size does not establish the bore configuration. Send both when documented.

Can I submit a valve without an operator?

Yes. Show what is present and explain what is missing for evaluation.

What if the current catalog does not match my size?

Send the actual plate and original records. Older offerings may differ from the current page.

How is payment arranged?

We provide upfront payment in most cases. Payment terms are agreed with you before pickup or shipping.

More surplus seller FAQs

Send WKM 310F details

Send your inventory for review

Call 832-721-8398 or email jcostello@nationwidesurplus.net. Include the equipment location and a phone number where we can reach you.

Identification references

Technical product identities are checked against manufacturer documentation. These references do not establish the condition of your equipment or a manufacturer affiliation.

Scroll to Top