Nation Wide Surplus

Home · Valve types · Brands

Sell Fisher V200 Control Valves

A storeroom label saying “flangeless Fisher valve” leaves important information out. Nation Wide Surplus buys identifiable surplus V200 valves and assemblies. Send the body designation, marked size and class, plus the actuator and controller labels, so a bare valve and a complete control package can be reviewed correctly.

Call 832-721-8398 · Upfront payment in most cases

What we buy

Submit unused project stock, maintenance spares and used V200 takeouts. Keep different sizes and configurations on separate inventory lines. If several identical-looking valves have different tags or mounted controls, show those differences rather than counting the entire pallet as one model.

Model identification guide

V200 belongs to Fisher’s segmented Vee-Ball family. The body model and actuator model are separate identities. Photograph the full V200 marking, serial number and any Series B or other construction information. Preserve older codes instead of assuming all production versions use the same parts.

Nameplate locations

Start with the accessible valve identification plate and visible body marks. Send a wide view showing where each plate belongs, then a close-up that keeps the full serial number legible. Photograph actuator and instrument labels separately. If insulation, mounting or corrosion hides the valve identity, show what is visible without dismantling the equipment.

Sizes and configuration

The referenced Vee-Ball manual covers V200 nominal sizes 1 through 10 inches. Connection and material availability vary by size and document edition. Record the individual marked size; nominal pipe size does not establish the installed flow capacity.

Body and internal materials

Published Vee-Ball body options include WCC and LCC carbon steels and stainless constructions. These are family examples, not a claim for every V200. Capture actual body marks and matched records; a body alloy does not identify all internal components.

Pressure classes

Flangeless V200 constructions have size-dependent flange compatibility, with Class 150, 300 and 600 patterns appearing in manufacturer tables. Selected flanged constructions are also documented. Send the precise tag and end details rather than treating “200” as a pressure rating.

End connections

V200 is commonly encountered as a flangeless body between pipe flanges; selected flanged versions also exist. Photograph both ends and the complete side profile. Show whether companion flanges, studs or attached pipe are included, and highlight visible face damage.

Actuator combinations

Fisher documentation illustrates V200 with a 2052 rotary actuator. Actual surplus may have other documented assemblies. Send the actuator model, size, mounting and accessible label; do not assume fit or torque suitability from the valve diameter.

Actuator buying guide

Positioners and controls

A DVC6200 appears on a manufacturer V200 assembly example. Photograph the installed device’s exact label and suffix, bracket and feedback arrangement. Record a controller separately from the body; an instrument-only package should not be listed as a complete V200 valve.

Positioner guide

FIELDVUE equipment

Where this equipment is found

Check process-control spare racks, packaged skid leftovers and rotary-control valve takeouts. Include the control-loop tag or purchase record when available, but keep it tied to the photographed unit.

Industries and applications

The Vee-Ball family is used in liquid, gas, steam and fibrous-slurry control applications. Tell us the actual known former duty and removal reason for your equipment. A broad application listing does not establish the suitability or cleanliness of an offered valve.

What photos to send

  • Complete V200 assembly and an overview of the lot.
  • Full valve tag, serial number and accessible casting marks.
  • Both end connections and visible condition.
  • Actuator, positioner and accessory labels.
  • Matching packaging labels, specifications and repair records.

What information to send

List quantity by full model, marked size, class, documented materials, condition and equipment location. State whether stock is unused, a stored spare or a used takeout. Include known service history, missing parts and deadlines. For large assemblies, add weight, transport dimensions and loading access; mark unknown information as unknown.

Condition considerations

Clear tags, protected faces and intact mounting components make the inventory easier to assess. Disclose exposed storage, missing linkage, shaft damage and known control faults. Exterior condition does not prove seal performance or internal trim identity.

How payment works

We provide upfront payment in most cases. Payment terms are agreed with you before pickup or shipping.

Shipping and pickup

Measure the entire assembly, including the actuator and accessories. A compact flangeless body can still be part of a wide or heavy package. Provide the pallet count, approximate weight, loading method and pickup location before freight is planned. Pickup or brokered freight is arranged case by case for the equipment, location and agreed purchase.

Fisher V200 seller FAQs

Is every V200 flangeless?

No. Manufacturer literature also documents selected flanged constructions. Show the actual end style.

Does V200 mean Class 200?

No. Record the class from the valve identification and matching documentation.

Can I sell a bare V200 body?

Submit its readable markings, condition and location; identify missing components.

Should I combine different actuator versions?

Keep separate actuator and controller labels with each valve inventory line.

Is V100 a direct replacement identity?

No. Preserve the original model and construction; this is a purchase-identification guide, not an interchangeability claim.

More seller questions

Request a V200 purchase evaluation

Send clear identification photos before spending time preparing a detailed inventory. Tell us what is included, its condition and where it is located.

Send equipment details

Call 832-721-8398 or email jcostello@nationwidesurplus.net. Include the equipment location and a phone number where we can reach you.

Identification references

Technical product identities are checked against manufacturer documentation. These references do not establish the condition of your equipment or a manufacturer affiliation.

Scroll to Top