Nation Wide Surplus

Home · Valve types · Brands

Sell Fisher V150 Control Valves

A spare V150 in a maintenance shop, a contractor’s leftover assembly and a valve received by a surplus yard all deserve a closer look before being valued as scrap. Nation Wide Surplus evaluates identifiable Fisher V150 equipment, from individual valves to mixed plant inventory. Start with the tags, the condition and the location.

Call 832-721-8398 · Upfront payment in most cases

What we buy

Send unused surplus, stored spares, used V150 bodies and complete actuated assemblies. Include mixed lots containing different sizes or related Fisher equipment. Tell us whether accessories are attached, loose or missing.

Do not separate a controller from a complete assembly just for an initial sales inquiry. Photograph the package first, then each identification label. Evaluation depends on the actual equipment and does not guarantee a purchase.

Model identification guide

V150 identifies a Fisher Vee-Ball segmented-ball control valve. The valve body, actuator and controller are separate identities; a DVC6200 label alone does not prove that the valve underneath is a V150.

Read the complete model designation, including any suffix, and keep the serial number with the item. If you have several similar assemblies, group them by their actual tags rather than their appearance.

Fisher model family map

Nameplate locations and serial numbers

Photograph the accessible valve identification plate and visible body markings. Fisher’s instruction manual identifies the valve serial number on its nameplate. An actuator or controller may have its own plate and serial number.

Plate visibility differs with the mounting arrangement. If a plate cannot be found, send wide views from multiple sides and a close-up of each readable marking. Do not dismantle equipment to prepare an inquiry.

Manufacturer instruction manual

Common sizes to record

The April 2024 bulletin’s WCC V150 table includes NPS 1 through 24, with a 24×20 configuration; available sizes vary by construction. Copy the exact nominal size rather than assuming every material has the same range.

For mixed inventory, count each marked size separately. A photo of the complete valve helps us relate its tag to the correct item.

Common materials and documentation

Examples in the manufacturer’s tables include WCC carbon steel and CF3M/CF8M stainless constructions. Record the actual material marking and any matching material records.

Body material does not establish the seal, ball, shaft or other internal materials. If paperwork cannot be tied to the offered item, identify it as unconfirmed instead of treating it as proof.

Pressure classes and ratings

CL150 and specified PN10/16 constructions appear in the V150 tables. These markings are not a universal operating-pressure claim; pressure and temperature limits depend on the documented construction.

Send the full rating marking, not only a handwritten inventory description. The purpose of our initial review is to identify surplus for purchase, not to certify suitability for a new process.

End connections

The bulletin documents raised-face flanged V150 constructions and an NPS 24 flangeless option. Show both ends, including the flange faces and any remaining attached pipe.

Mention damaged faces, missing protection or modifications. If the valve is crated, start with the packing label and existing documentation; tell us which details are still concealed.

Actuator combinations

The manufacturer illustrates V150 assemblies with Fisher 2052 and 1061 actuators. These examples do not mean every actuator fits every V150.

Photograph the installed actuator’s full type, size and mounting arrangement. Say whether it was removed from this valve or is a separate spare. Do not imply a documented pairing when the parts arrived loose.

Valve actuator buying guide

Positioners and digital valve controllers

DVC6200 appears on documented V150 assembly examples. Include its full label and any other instrument fitted to your equipment. A later controller retrofit does not change the valve-body identity.

Keep mounting hardware and feedback parts identifiable. Small instruments can have meaningful resale potential, so include them in the photos rather than leaving them out of the inventory.

Digital valve controller hub

Fisher FIELDVUE buying page

Where V150 equipment is encountered

The Vee-Ball family bulletin describes gas, steam, liquid and fibrous-slurry applications. Previous service matters when reviewing used equipment; a clean exterior does not establish internal condition.

Tell us what the valve controlled, if known, and why it became surplus. Separate “removed during an upgrade” from “removed for a known leak or control problem.”

Manufacturer Vee-Ball bulletin

Industries and seller situations

We welcome inquiries from maintenance teams, industrial contractors, plant inventory managers and surplus yards. For a chemical plant, mill, energy facility or other industrial operation, the useful information is the actual equipment and its documented history.

A project closeout may have unopened stock with purchase records. A plant turnaround may have complete used assemblies. A scrap-yard load may need an initial identification review. Describe your situation without assuming every item in the lot has the same condition.

What photos to send

  • One full view of each distinct assembly and an overview of the lot.
  • Valve nameplate and readable body markings.
  • Separate actuator and controller labels.
  • Both ends and accessible visible condition.
  • Damage, missing components, packaging and relevant paperwork.

Use photos that let us match the tag to the item. For similar valves, include a temporary inventory number in each photo set.

What information to send

Include quantity, equipment location and ZIP code, new or used status, marked size and rating, documented materials and previous service if known. Tell us whether it is still installed, stored indoors or ready for pickup.

Mention any removal deadline, approximate weight and dimensions, loading equipment and access restrictions. You do not need every specification to start; distinguish information you know from information that needs checking.

Condition and purchase-value considerations

Readable identification, matched records and complete assemblies can make the lot easier to evaluate. Unused spares, used takeouts and incomplete bodies should be listed separately.

Corrosion, damaged flange faces, missing operators and uncertain internal wear can affect an offer. A heavy valve is not automatically valuable, and a small controller is not automatically low value. Configuration, condition, current demand and transport costs all matter.

Keep repair or test reports tied to their serial numbers. A report for a similar valve does not establish the condition of this one.

How payment works

We provide upfront payment in most cases. Payment terms are agreed with you before pickup or shipping.

Shipping and pickup

We evaluate opportunities nationwide, including smaller industrial towns. Depending on the lot, location and schedule, arrangements may involve direct pickup, parcel shipping for suitable loose instruments, or freight for larger assemblies.

Freight brokers can sometimes arrange trucks within hours, but timing depends on availability and the job. Send the location and deadline early. Tell us whether equipment is supported on pallets or transport skids and what loading assistance is available.

Fisher V150 seller FAQs

Can I sell one V150 instead of an entire lot?

Send its details. We evaluate the individual opportunity, including configuration, condition and location.

What if the tag is unreadable?

Send overall photos and every visible marking. We may need more information before identification or an offer.

Do you consider a body without its actuator?

Send photos and explain what is missing. Bare bodies and complete assemblies are evaluated according to what is actually offered.

Should I remove the DVC controller first?

Show the complete assembly and controller label as they are. Initial review does not require dismantling the equipment.

Can you arrange collection from a small town?

Send the ZIP code, quantity and loading details. Pickup or freight arrangements depend on the purchase and availability.

When will I be paid?

We provide upfront payment in most cases. Payment terms are agreed with you before pickup or shipping.

More seller questions

Contact a Fisher equipment buyer

Start with the tag. Show us the lot. Tell us where it is.

Request a purchase evaluation

Call 832-721-8398 or email jcostello@nationwidesurplus.net. Include the equipment location and a phone number where we can reach you.

Identification references

Technical product identities are checked against manufacturer documentation. These references do not establish the condition of your equipment or a manufacturer affiliation.

Scroll to Top